Exhibitors list

12.40 – 13.10: Optimaliseer uw stofexplosiebeveiliging en voorkom stilstand met innovatieve technieken – IEP Technologies

When an ungrounded tank truck is being filled/emptied with a liquid or powder, the road tanker could accumulate enough static to pose a discharge risk. To counteract this risk, it is important to ensure that the tank truck does not have the capacity to accumulate static electricity. The most practical and comprehensive way of achieving

SmartDS Dynamic Explosion Detection is designed to provide high-speed detection of an incipient explosion with the highest level of false alarm immunity available for active explosion protection solutions. The SmartDS detection system is programmable to accommodate a wide range of hazard and process conditions, including vacuum and positive pressure applications. The SmartDS system has the

IEP Technologies provides a complete range of cost-effective industrial explosion protection solutions and is pleased to introduce the IsoDisc™ for passive isolation. The IsoDisc™ is an effective, self-actuating and self-resettable device providing explosion isolation to application handling combustible dusts such as air aspiration inlets of mills or clean air ducting to interconnected equipment. The IsoDisc™

eSUPPRESSOR™ by IEP Technologies The new eSUPPRESSOR™ by IEP Technologies is a high-rate discharge extinguisher used for explosion suppression and isolation systems. Its electro-mechanical actuating mechanism, using no pyrotechnic devices, is unique to the industry. The eSuppressor features include pressure monitoring, LOTO capability and LED indication of device status. A key benefit is that all

The IEP Technologies IsoFlap™ Valve is NFPA 654, 69 and EU ATEX Directive compliant, low cost, reliable explosion isolation solution which mitigates explosion propagation risks to upstream equipment. These are effective, self-actuating devices providing inlet explosion isolation to protected vessels handling combustible dusts such as dust collectors, cyclones, and other process equipment. To learn more

Many process vessels are located inside a building or areas where standard explosion venting cannot be safely employed. For these applications, the IEP Technologies EVN3.0 flameless explosion vent may be the best protection solution. When an explosion occurs, the EVN3.0 opens and vents the explosion pressure through a flame arrester, thereby cooling the hot gases

IEP Technologies provides a complete range of cost-effective industrial explosion protection and is pleased to introduce the IV8 Flameless Vent. The IV8 provides an explosion protection solution for process vessels which are located inside a building or other areas where standard explosion venting cannot be safely employed. The IV8 utilizes a stainless steel explosion relief

Isolate Explosions – Chemically or Mechanically. IEP Technologies Isolation Systems are designed to detect an incipient explosion and react to minimize the risk of the deflagration from traveling between interconnected equipment within your process. The Chemical Type isolation method discharges an explosion suppressant into pipeline/ductwork mitigating the passage of flame and burning materials to interconnected

The EX8000™ Multi Zone Control Unit is responsible for the protection system control and status verification functions. The electronic system is integrated on a modern and reliable board with redundant circuitry for all safety functions. Power supply, emergency battery and connection technology are all accommodated within the cabinet. All signals from the explosion pressure, spark,

Detect and suppress explosions in milliseconds. IEP Technologies Explosion Suppression Systems are designed to detect, within milliseconds, the pressure build-up of an incipient explosion and deliver an explosion extinguishing agent to the enclosed area before destructive pressures develop. The extinguishing agent inhibits the explosion reaction by withdrawing heat from the burning flame and thus lowering

Relieve Explosion Pressure Safely. An IEP Technologies Explosion Vent is a relief device that ruptures at a predetermined pressure to allow the fireball and explosive pressure to vent to a safe area. Rupture style vents are economical to install and these highly efficient vents fit into the walls of a process volume. They are available

Flexible Connector Seamless Polyurethane Tubing Safe for direct food contact per FDA ATEX Zone 20-21-22 and EC 10/2011 & EC1935/2005 compliant Easy, cut-to-length connectors Transparant Diameters from 2″ until 12″ -18*C to 106°C

FOR STORAGE AND FEEDING In many cases it is necessary to include a bunker or silo in the production process. Sometimes for temporary storage, as a buffer between various processes and machines or to align the dosing of the bulk goods. CUSTOMIZED BUNKERS AND SILOS Heilig Mixing Technology can engineer, design and manufacture bunkers and

FOR OVERHAULING AND UPGRADING In addition to mixing units and fully integrated systems, Heilig Mixing Technology also supplies spare parts and components for a wide range of industrial mixers (regardless the brand). We supply from stock. We offer technical support too, up to 24/7 emergency service. We can support you with overhauling, optimisation of your

FOR SIFTING, SIEVING AND DEAGGLOMERATING Vibrating screens are perfect for sifting, sieving and separating solids, such as: granulates and powders. On top of that, vibrating screens can also be used to separate liquids from solids. Heilig Mixing Technology offers vibrating screens (or vibrating sieves) with a maximum of four sieving decks offering five product fractions.

FOR SIFTING AND SIEVING The centrifugal force of a rotary screen/sieve is perfect for the sifting, sieving and separating of granulates and powders. When the granulates or powders enter the sieving compartment, the variable, rotational forces and sieve (deck) trays split the smaller fractions from the larger ones. The residual materials and contaminants are conveyed

FOR ACCURATE GRADING, SCALPING OR SIZING We offer two types of grading machines. We have sieves that convey the products through a machine using vibrating motors. But we also offer tumbling screens. Tumbler screening machines also convey the product through a machine, but with a circular motion instead. Tumbler screening machines can be built in

FOR (DELICATE) GRANULATES Aero mechanical conveyors are commonly used to convey granulated materials. An aero mechanical conveyor consists of a tubular design. Inside the tubes run wires with evenly mounted discs. These discs move with a linear speed creating an air stream. When the granulated materials enter the system, the stream of air fluidizes and,

FOR VERTICAL MATERIAL TRANSPORT Heilig Mixing Technology offers various solutions for transporting goods from the food and pharmaceutical industry. Elevator conveyors are a perfect solution for transporting materials in a vertical direction. We often engineer, manufacture and install customised conveyors as specifications vary and depend on the actual application and material characteristics. In the food

FOR TRANSPORTING MATERIALS Belt conveyors can be part of the entire mixing installation to convey goods. When you implement belt conveyors into your mixing installation, the transportation of the goods to and from the mixer can be optimised guaranteeing an efficient production process. We offer high-quality conveyor systems to ensure that sensitive materials cannot be

The screw conveyor (also known as auger screw conveyor, screw feeder and auger feeder) is available in different sizes. Therefore the screw conveyor can be used in various mixing installations for different techniques. The rotating helical blade transports powder or granular materials horizontally or upwards in the vessel for optimal mixing. We distinguish the following

FOR HOMOGENIZES FREE-FLOWING PRODUCTS At Heilig Mixing Technology we often engineer customized solutions. We can design a silo mixer (also known as batch mixer, feed mixer, blending silo and mixing silo) according to your specific requirements. Depending on the product certain mixing specifications apply, for example: agglomerate size, bulk density and volume. Silo mixers are

FOR SHORT BATCH CYCLE TIMES The vertical ribbon mixer (also known as vertical mixer, ribbon blade mixer and ribbon blender machine) features high grades of stainless steel and has a specific design (less high). This mid shear mixer is commonly used in the food industry thanks to the fact that it is extremely easy to

FOR HIGH-QUALITY MIXING AND BLENDING The conical mixer (also known as V-mixer, conical screw mixer, Nauta mixer and Vrieco Nauta mixer) is known for its outstanding, high-quality mixing and precise operation. The mixing unit takes up little floor space thanks to its conical shape. In addition you will benefit from the total and fluid outflow

FOR HIGH-QUALITY MIXING AND BLENDING The conical mixer (also known as V-mixer, conical screw mixer, Nauta mixer and Vrieco Nauta mixer) is known for its outstanding, high-quality mixing and precise operation. The mixing unit takes up little floor space thanks to its conical shape. In addition you will benefit from the total and fluid outflow

WASHING SYSTEMS FOR RECYCLING AND BULK HANDLING To wash various materials during the processes of the recycling and bulk handling industry, N.M. Heilig can design, manufacture, and supply a wide variety of washing systems, for instance, washing drums, bucket wheels, hydrasander, hot washers, frictions washers.

Today, mechanical sorting and separating have been developed into sophisticated techniques, that manual or visual inspection is no longer required. However, in some cases, clients prefer to incorporate control rooms or sorting cabins in the recycling process when: Client requires a final inspection in product streams Quality processed materials fluctuate strongly (e.g. contaminants) Limited budget

Crushing equipment can be put to use to create a proper particle size. These machines can be designed and manufactured both stationary and mobile and as an individual unit or implemented in a recycling or bulk handling process. N.M. Heilig offers a wide variety of crushers for applications such as construction and demolition, sand and

For a variety of materials N.M. Heilig offers customized industrial mixers, also referred to as a conical mixer or Nauta mixer, with capacities from 6 liters up to 75,000 liters. We are experienced in designing and manufacturing industrial mixing equipment for powders and pastes for the following industries: food industry, feed industry, pharmaceutical industry and

In the recycling and bulk handling industry implementing an air separator to the process sorts the materials and separates the lighter from the heavier fractions. Other names for this application are air classifier, wind sifter, and wind shifter. The advantage of (pre-)sorting through an air stream is that it does not require any water and

Screening equipment comes in many shapes and sizes and provides a variety of sorting solutions. At N.M. Heilig we have been applying screening technologies for over four decades and to many industries. We know that client’s requirements differ and the most practical solution for your recycling or bulk handling process is a tailor-made one. Together

For bulk handling and recycling industries many processes require a temporary storage solution, a buffer storage for feeding a production system or transloading. N.M. Heilig designs and supplies customized storage systems such as hoppers, bunkers and silos.

In addition to transloading equipment for bulk materials N.M. Heilig also designs and manufactures mobile equipment. Another efficient and cost-effective method of transportation but in a construction that offers flexible employability on many terrains thanks to the options of, for instance, telestack, swiveling chassis, or tracks on the machines.