Exhibitors list

Repair our Virtual Gearbox in the fastest time and win…. Next to repairworks on gearboxes we can talk about replacement, engineering, CoMo, Pro-active Maintenance, Training courses,… Looking forward to your visit

Production requirements in the powder industry are becoming increasingly strict. Whereas initially, a dosing accuracy of 100 grams was sufficient for processing bulk materials, the demand came for a much more accurate dosing system. In response to this demand, our engineering department has developed a Micro Dosing System with an accuracy of 1 gram.

MINK claw vacuum pumps and compressors are the result of continuous development in claw technology. Decades of experience in countless applications have led to substantial improvements. MINK claw technology combines performance, reliability and efficiency through an innovative design. It can be used for both, vacuum and compressed air generation. The dry and contact-free operating principle

Mixaco produces container mixers, warm cold mixers and bag mixers. With a container mixer, a container is used to fill and transport the material to the mixer and after mixing to the next process step. These mixers are mainly used in the plastics industry but also in the food industry. Hot/Cold mixers are mainly used

Our used mixers are suitable for many different industries. Various models are available for the chemical industry, the food industry and the pharmaceutical industry. With our used industrial mixers you are enabled to quickly procure – whether to have a quick replacement or to build on existing capacity – at a low investment cost.

Continuous and Batch-type, Single Shaft Mixers offered by WAMGROUP’s MAP Division reflect the high quality of solutions originating from profound know-how in process technology, from individual tuning of machine components in compliance with the mixed product, as well as from the selection of specific materials in conjunction with state-of-the-art manufacturing technologies.

Hosokawa Micron has developed a wide range of innovative mixing equipment and technologies for powders, pastes, slurries and liquids. Our Vrieco-Nauta® mixing technologies can be used for a multitude of applications, like homogenising bulk materials, improving product quality, coating particles, fusing materials, wetting, dispersion of liquids, altering functional properties and agglomeration.

Very gentle vacuum-drying at fast reaction rate for dry, moist and viscous materials at variable filling levels The spiral mixing blade initiates a three-dimensional flow of the mixing goods; creating a spiral upward movement on the periphery and downward flow in the centre. The reactor is vacuum and pressure tight and heatable by steam, thermal

In order to achieve the highest suction and filter performance, we as Transtech use high-quality components industrial vacuum cleaners from Wieland Lufttechnik. Wieland is the industry standard in terms of function and quality. Wieland supplies vacuum cleaners from 2.2 kW to 11 kW. Wieland vacuum cleaners are suitable for vacuuming dry substances and we also

Fast. Flexible. MOBILE. Our stand-alone models will take your bulk material pretty much anywhere you need it to be. Smart handling. Filling and transferring made easy – right on site and with incredible flexibility. Amazingly short handling times and optionally available as a stationary system. No need for retrofitting – just plug in and go!

Our Atlas filling machines are modular, so different dosing units can be used and the system can be easily suited to your demands. These filling machines are frequently used in the chemical and food industry. Our self-developed dosing screw makes it possible to fill dust-tight and to clean the machine very quickly.

Mobile Big-Bag – filling station VARIO BB-S Mobile: The filling station can be easily moved with a forklift on-site. Multiple use of RONDO/QUADRO: The existing STANELLE jet loaders RONDO/QUADRO normally for open and closed truck loading can also be used for Big Bag loading. An adaptation to existing loading systems is also avalible as an

In addition to transloading equipment for bulk materials N.M. Heilig also designs and manufactures mobile equipment. Another efficient and cost-effective method of transportation but in a construction that offers flexible employability on many terrains thanks to the options of, for instance, telestack, swiveling chassis, or tracks on the machines.

A mobile filling line, which can be excecuted open of closed, is mostly used by our logistic partners. The mobile filling uses different material supplies to fill bigbags and/or octabins, which are for example in a silo park. The specific installation can move automatically by means of several electric motors and a remote control. Another

The unloading of bulk cargo from ships relies heavily on hoppers. The flexibility and customisation of mobile hoppers make them a popular choice among global ports and logistics hubs. No fixed or semi-fixed unloading equipment matches the mobility LNK Industries offers. With mobile hoppers designed by LNK Industries, bulk cargo can be unloaded safely and

The SMFS type flat gate is attached to silo and vessel discharges and assures optimal sealing of stored dusty and granular bulk goods up to 8 mm grain size. This modular gate allows the installation of manual, pneumatic, or electric motor drives on the same base frame.

The SMFS type flat gate is attached to silo and vessel discharges and assures optimal sealing of stored dusty and granular bulk goods up to 8 mm grain size. This modular gate allows the installation of manual, pneumatic, or electric motor drives on the same base frame.

The SMFS type flat gate is attached to silo and vessel discharges and assures optimal sealing of stored dusty and granular bulk goods up to 8 mm grain size. This modular gate allows the installation of manual, pneumatic, or electric motor drives on the same base frame.

Our cutting-edge modular systems for crushers and shredders control dust issues at the source.

Unload small quantities from the bigbag with ease, with the Modulo SP you easily create a bigbag unloading station! The Modulo SP consists of a powder-coated steel frame with a steel box. With this frame, bigbag with unloading hose can be unloaded. The bigbag is placed on the bottom plate, the unloading hose drops through

Weighing & Inspection has partnered with MoistTech Corp to quickly become the leader in Moisture Measurement in the Benelux region. MoistTech is supported by the original manufacturers of Near-Infrared (NIR) technology in the industrial moisture industry manufacturing a range of on-line sensors and at-line instruments for moisture measurement and real-time moisture process control for numerous

MoistTech moisture sensors are the optimal solution for determining the moisture level of your products and processes in real-time. This allows operating personnel to make immediate adjustments to the moisture content based on real-time measurements. The sensors can do this for practically every product and raw material in the harshest manufacturing environments. Sensors are available

THE MOISTTECH NIR SERIES 3000 IS AN INTELLIGENT INFRARED MOISTURE METER MEASURING POSSIBILITIES WITH NIR TECHNOLOGY: • Fat • Moisture • Thickness measurement (paper and lms) • Weight of coatings • Proteins • Collagen • All elements that absorb NIR

For moisture or dry substance determination of powders, granulates and solids, the NIR measurement technique is often the most practical method for fast analysis. This technique is based on the principle that a specific wavelength of infrared light is absorbed by water. Within seconds our laboratory and at-line instruments determine the moisture percentage of a

The technique used for moisture measurement based on radio waves uses the principle that radio waves are damped and shifted in phase by different materials. This is due to the fact that every material has its own dielectric constant (electrical conductivity). This method is called RF (Radio Frequency) technique. We supply handheld meters, on-line and

Mucon deliver a technologically advanced range of powder processing valves dedicated to improve the productivity and handling of powders and bulk solids in a wide variety of industries.

Muller Beltex supplies a unique combination of a very wide range of top-quality branded products for the agricultural & industrial sectors for horizontal and vertical transportation and processing of raw materials. This family company is founded in 1950 as a company trading in transmission belts and conveyor belts. After a few years, the product range

The Multifunctional Sample Carousel enables the fully automatic sampling of samples with varying sizes. You determine the size of the samples, and how many samples of a particular size you need. Whereas the Sample Carousel could already take multiple samples completely automatically, the Multifunctional Sample Carousel takes things one step further. As the name suggests,

Features WIMW Multiweighers Calibratable, automatic balance in the medium capacity range up to 40 t/h for all kinds of bulk solids, also conditionally free-flowing. * Calibratable, automatic scale in the medium capacity range for a wide range of bulk solids, also conditionally free-flowing * Scale container made of stainless steel plate with rounded corners and

AirC Connect allows you to remotely monitor and control your Munters dehumdifier, making climate management easy. It offers complete overview with temperature and humidity monitoring, setpoint control, scheduling functions, personalized alarm settings and visualized live and historical data. It also opens the door to future connectivity features and benefits. Full equipment overview at a glance

The Munters ML series are self-contained desiccant dehumidifiers that remove water vapor from dry rooms and low humidity production and process environments. With integrated humidity meters, these versatile units maintain relative humidity, ensuring increased production time and product safety. These compact and self-contained dehumidification modules are housed in corrosion-resistant thermoset plastic. The ML has an

The Munters ML Plus is a compact, energy-efficient modular climate control system with integrated temperature and humidity control. This proven self-contained desiccant dehumidification system removes water vapour from indoor environments where protecting valuable materials and sensitive products is essential. The compact and energy-efficient ML Plus provides humidification and dehumidification for optimum indoor climate control. The

Ionising is thé solution for eliminating static electricity on non conductive objects. The NEOS range represents the latest in advanced electrostatics. 4 powerful 24V DC products suitable for a wide range of applications. NEOS are capable of providing targeted ionisation in even the most challenging of situations including varying geometry, high speed, long distance as

The SYMACH net weigher for free-flowing and semi free-flowing product is available in two versions: – Belt-fed Net Weighing system – Gravity – Gravity Net Weighing system The SYMACH weighing systems offer: high accuracy high capacity easy to clean design easy, intuitive integrated controls certifiable system optional

This mixer is perfect for dry mixing requiring the management of cross-contaminations. It is optimized for food industry, fine chemicals and pharma. It is fully electric and pneumatic. Different versions are available for all types and volumes of tank and volumes from 0.5 to 2.5m³. It is also optimized for an easy placement and removal

With 160 years of experience in the field of water treatment plants, Aerzen continues to offer innovative solutions aimed at increasing efficiency, reliability, digitalization and expanding capacity. The “system intelligence” approach is holistic and combines modern technologies to increase capacity in limited spaces, while reducing energy and costs. The company achieves energy savings of up

GKM Siebtechnik offers a new generation of pneumatic lifting devices. For a quick and easy exchange of the screen inserts This new and easy system has already been successfully used by well-known customers on the market. Your main benefits include… – Ideal for vibrating screening machines – Very fast exchange of the screen inserts possible

The SW fabric provides outstanding impact and cut resistance The Nonex cover provide resistance to fat & oil and enables easy accessorising (cleats, v-guide, corrugated sidewalls…) The SW belts are engineered with superior cut and tear resistance, offering enhanced durability The belts are light and thermo-weldable to reduce maintenance downtime The belts can run on

Modular pipe systems

APPLICATION The Novex valve is an explosion-proof flap valve certified as a protection system according to Directive 94/9/EC and according to EN16447: 2014. It is completely autonomous and must be installed on a horizontal piping, at a certain distance from the protected volume. MAIN FEATURES OF THE NOVEX VALVE • Available from DN71 to DN1000.

This brochure gives an overview of most environmental products and services. The reason for uploading this brochure is that it gives an idea of our capabilities of our CFD services

Nozzle for surface technology find their origin in automation. Automatic car washing, coating, rinsing, etc with specifically suitable systems for easy adaptibility depending on the performance

Nozzles for various applications in the chemical industry – Scrubbing – cooling (adiabatic, quenching, belts, surfaces,…) – lubricating – Reactors – Moisterising – Coating – …