CEMENT SILOS – Factory Welded

The aggregate and cement silo in proven STANELLE quality made of steel sheet for
the storage of cement and other dry bulk materials with a maximum bulk density of
1400 kg/m³.
As far as transport permits, the silos are manufactured in one piece and welded tightly.
Equipped with loading and transport eyes, inspection opening NW 500, as well as
welding frame or welding opening for a Stanelle type SDAK 150 overpressure/vacuum
flap in the silo roof and on the silo cylinder a filling line DN100, up to height outlet flange,
hot-dip galvanised, with fixed coupling type A and a STANELLE filling bend type
FLOW BOW®.
The basic equipment includes a crushing cone inside the cone and a water-repellent ring
outside the cone.
The substructure consists of 4 tubular steel supports, with all necessary bandages,
Head and base plates as well as anchor screws. The height of outlet flange is approx.
1.500mm above foundation. Anchor bars must be provided and concreted in by the
customer. All screws are hot-dip galvanized, anchor screws black.
Standard types with different diameters and volumes are available. In addition, we also
offer other diameters and silo sizes according to customer requirements. The standard
cone angle is 53°. For difficult to discharge media, steeper cone inclinations must be used
and the discharge of the bulk material must be supported by special discharge aids, e.g.
Stanelle LUALO air looseners or ASK1xxx discharge vibrating basket. As accessories we
offer various prescribed and necessary accessories such as filling pipes, fixed ladders,
roof edge railings, overpressure dampers, filters, level probes and discharge aids.
The corrosion protection on the outside of the standard types consists of rust removal
by blasting, degree of rust removal SA 1 and a 2-component universal primer.
Optionally, we also supply rust removal up to SA 2.5 and exterior paintwork with
2-component top coat in various RAL colours as well as interior paintwork and special
paintwork.